home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Overload Trio 2
/
Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO
/
dir34
/
theref43.zip
/
LAYOUTS.ZIP
/
WD7000A
< prev
Wrap
Text File
|
1993-05-01
|
9KB
|
117 lines
╔═══════════════════════════════════════════════════════════════════════╗
║ Western Digital, Inc. WD7000-FASST2 ║
╠═══════════════════════════════════════════════════════════════════════╣
║ LED FD ║
║ ┌──────────────────────────────────────────────────────┐ ║
║ │ .... ┌───────┐ 1:::::::::: ┌────────┐ HD │╔═══ ║
║ └─┐ │Z80 ROM│ │SCSI ROM│ 1:: │║ ║
║ │ └───────┘ └────────┘ :: ┌┴╫┐ ║
║ │ +W201 W6 W9 ║ :: │ ║│ EXT ║
║ │ +W200 ║ :: │ ║│ HD ║
║ │ (+ late models only) W5 :: │ ║│ ║
║ │ +W99 +W98║ :: │ ║│ ║
║ │ W2 W3 W1 W4 ║ :: └┬╫┘ ║
║ └───────────────────────────┐ ┌┐ ┌──┘║ ║
║ └───────┘└────────────┘ ║ ║
║ INTERFACE: ISA(AT)->SCSI ║
║ CONTROLS: 2 Floppy drives (360K, 720K, 1.2M, 1.44M) ║
║ 7 SCSI devices (internal or external) ║
║ ║
║ ║
║ W1: Interrupt Selection ┌───┬───┬───┬───┬───┬─────────┐ ║
║ IRQ3: 1-2 IRQ7: 7-8 │SA7│SA6│SA5│SA4│SA3│I/O Addr.│ ║
║ IRQ4: 3-4 IRQ9: 9-10 ├───┼───┼───┼───┼───┼─────────┤ ║
║ IRQ5: 5-6 │ X │ X │ X │ X │ X │ 300H │ ║
║ │ X │ X │ X │ X │ │ 308H │ ║
║ W2: Interrupt Selection │ X │ X │ X │ │ X │ 310H │ ║
║ *IRQ15: 13-14 IRQ11: 19-20 │ X │ X │ X │ │ │ 318H │ ║
║ IRQ14: 15-16 IRQ10: 21-22 │ X │ X │ │ X │ X │ 320H * │ ║
║ IRQ12: 17-18 │ X │ X │ │ X │ │ 328H │ ║
║ │ X │ X │ │ │ X │ 330H │ ║
║ W2: DRQ/DACK Selection │ X │ X │ │ │ │ 338H │ ║
║ DRQ7: 1-2 DACK7-: 7-8 │ X │ │ X │ X │ X │ 340H │ ║
║ *DRQ6: 3-4 *DACK6-: 9-10 │ X │ │ X │ X │ │ 348H │ ║
║ DRQ5: 5-6 DACK5-: 11-12 │ X │ │ X │ │ X │ 350H │ ║
║ │ X │ │ X │ │ │ 358H │ ║
║ W3: I/O Address Selection │ X │ │ │ X │ X │ 360H │ ║
║ *SA3: 1-2 │ X │ │ │ X │ │ 368H │ ║
║ *SA4: 3-4 (default is │ X │ │ │ │ X │ 370H │ ║
║ SA5: 5-6 320h - use │ X │ │ │ │ │ 378H │ ║
║ *SA6: 7-8 the chart) │ │ X │ X │ X │ X │ 380H │ ║
║ *SA7: 9-10 │ │ X │ X │ X │ │ 388H │ ║
║ │ │ X │ X │ │ X │ 390H │ ║
║ W5: Terminator Power │ │ X │ X │ │ │ 398H │ ║
║ *1-2 (always jumpered) │ │ X │ │ X │ X │ 3A0H │ ║
║ │ │ X │ │ X │ │ 3A8H │ ║
║ +W98: BIOS Enable: │ │ X │ │ │ X │ 3B0H │ ║
║ *ON: BIOS Enabled │ │ X │ │ │ │ 3B8H │ ║
║ OFF: BIOS Disabled (for 2nd │ │ │ X │ X │ X │ 3C0H │ ║
║ card in multi-card setup) │ │ │ X │ X │ │ 3C8H │ ║
║ │ │ │ X │ │ X │ 3D0H │ ║
║ +W99: ROM Size: │ │ │ X │ │ │ 3D8H │ ║
║ 1-2: Reserved │ │ │ │ X │ X │ 3E0H │ ║
║ *2-3: 8Kx8 ROMs │ │ │ │ X │ │ 3E8H │ ║
║ │ │ │ │ │ X │ 3F0H │ ║
║ +W100: Reserved...MUST be jumpered │ │ │ │ │ │ 3F8H │ ║
║ └───┴───┴───┴───┴───┴─────────┘ ║
╚═══════════════════════════════════════════════════════════════════════╝
╔═══════════════════════════════════════════════════════════════════════╗
║ WD7000A Page 2 ║
╠═══════════════════════════════════════════════════════════════════════╣
║ ║
║ W4: BIOS Address: ┌────┬────┬────┬────┬─────────┐ ║
║ │SA16│SA15│SA14│SA13│BIOS ADDR│ ║
║ *SA13: 1-2 ├────┼────┼────┼────┼─────────┤ ║
║ *SA14: 3-4 │ X │ X │ X │ X │ C000h │ ║
║ SA15: 5-6 │ X │ X │ X │ │ C200h │ ║
║ SA16: 7-8 │ X │ X │ │ X │ C400h │ ║
║ │ X │ X │ │ │ C600h │ ║
║ (Default BIOS address is │ X │ │ X │ X │ C800h │ ║
║ D800h. Use the chart to │ X │ │ X │ │ CA00h │ ║
║ change the address.) │ X │ │ │ X │ CC00h │ ║
║ │ X │ │ │ │ CE00h │ ║
║ +W200,201: Floppy Drive Type: │ │ X │ X │ X │ D000h │ ║
║ │ │ X │ X │ │ D200h │ ║
║ W200: 1st Floppy Drive: │ │ X │ │ X │ D400h │ ║
║ 1-2: PS/2 type floppy │ │ X │ │ │ D600h │ ║
║ *2-3: AT/ANSI type floppy │ │ │ X │ X │ D800h *│ ║
║ W201: 2nd Floppy Drive: │ │ │ X │ │ DA00h │ ║
║ 1-2: PS/2 type floppy │ │ │ │ X │ DC00h │ ║
║ *2-3: AT/ANSI type floppy │ │ │ │ │ DE00h │ ║
║ └────┴────┴────┴────┴─────────┘ ║
║ ║
║ W7: 1-2: Floppy Speed Support: ON: Dual Speed (300/360) support ║
║ *OFF: Single Speed only (300 rpm) ║
║ ║
║ W8: 1-2: Floppy Write Precomp: ON: 187ns write precomp. ║
║ *OFF: 125ns write precomp. ║
║ ║
║ W6,W9: Floppy Controller: ║
║ ║
║ *W6: 1-2 ┌────┬────┬────────────────────────────────┐ ║
║ *W9: 1-2 │ W6 │ W9 │ FUNCTION ENABLED │ ║
║ ├────┼────┼────────────────────────────────┤ ║
║ │ X │ X │-Floppy Support Disabled │ ║
║ │ │ X │-Floppy Support Enabled w/Hard- │ ║
║ │ │ │ Card Only. │ ║
║ │ │ │-Floppy Support Enabled w/no │ ║
║ │ │ │ Hard-Card or Combo installed. │ ║
║ └────┴────┴────────────────────────────────┘ ║
║ ║
║ Normal settings for Floppy Support will have the jumpers ║
║ at W6 & W9 removed. ║
║ ║
╟─────────────────────────┐ Additional Info ┌───────────────────────────╢
║ ║
║ Due to Engineering Changes in the 7000, additional jumpers were ║
║ added (W98,99,100,200,201) increasing the board's flexibility. These ║
║ are marked with a (+). Newer models also added an LED and fuse for ║
║ term. power. ║
║ Software for the 7000 comes from Columbia Data Products, called ║
║ SST. The OEM version of the board is the 7000-ASC, and the consumer ║
║ version, with the SST software, is called 7000-FASST, or 7000-FASST2. ║
║ The Hardware design was sold to Future Domain Corp. in 1991. ║
╚═══════════════════════════════════════════════════════════════════════╝